¾″ BSP Water Butt Extension – Valve & 20mm MDPE Connector

Add accessible manual flow control at a rainwater tank with the supplied plastic tank fitting and inline valve.

Product details

• Tank mounting thread: ¾″ BSP male
• Tank connector outlet: ¾″ BSP female
• Tank fitting: plastic
• Supplied sealing parts: 1 back nut and 2 washers
• Extension: 50mm, supplier-stated connector extension
• Valve: black/orange manual plastic valve, ¾″ BSP male/male
• Finished outlet: 20mm MDPE compression fitting
• Reference: WBEX34MF-KIT017

What is included

• 1 × 50mm extension tube, ¾″ BSP male/female
• 1 × back nut
• 2 × sealing washers
• 1 × black/orange manual inline valve, ¾″ BSP male/male
• 1 ×20mm MDPE straight compression connector with ¾″ BSP female thread

Fitting your product

Match the actual tank fitting or wall and the final hose or pipe connection before installation. Measure the supplied tank connector and follow its installation instructions before drilling a new hole. Assemble and inspect all joints before filling the tank. Tank, pipe, hose, separate hose clips and PTFE tape are supplied separately unless listed below. MDPE size refers to pipe outside diameter. Prepare and insert compatible pipe according to the fitting instructions.