Add a controlled water outlet to a suitable tank with a brass reducing connector and the listed tap or valve. The kit includes PTFE tape and uses a ¾″ BSP male tank connection.
Product details
Tank mounting thread: ¾″ BSP male
Tank connector outlet: ½″ BSP female
Tank connector: brass, supplied back nut and washer
Tap inlet: ½″ BSP male
Tap: plastic dial tap, grey/white
Finished outlets: two independently valved male snap-on plugs
Reference: WB12-BRASS-KIT-010+
What is included
1 × brass reducing tank connector, ¾″ BSP male to ½″ BSP female, with back nut and washer
1 × roll of PTFE tape
1 × grey/white plastic dial tap with ½″ BSP male inlet and removable male snap-on adapter
1 × grey/white twin tap splitter with independent valves
Fitting your product
Check the tank fitting or wall before installation. The mounting thread is ¾″ BSP male; ½″ BSP refers to the connector outlet. For an unthreaded tank wall, measure the actual connector and follow its installation instructions before drilling. Assemble the supplied fittings, seal the joints appropriately and check for leaks before filling. Tank, hose, separate hose clips and extra fittings are supplied separately. Remove the tap’s quick adapter to fit the splitter to its threaded spout. Matching female snap-on hose couplings are required and supplied separately.
