Add manual water control with this brass water butt connector and hose-barb tap kit. The supplied tap screws into the adapter’s ½″ BSP female outlet and provides a ½″ hose barb for matching hose.
Product details
Tank mounting thread: ¾″ BSP male
Connector outlet: ½″ BSP female
Tank connector material: brass
Tap inlet: ½″ BSP male
Tap outlet: ½″ hose barb
Tap body: brass with silver finish
Control: manual cross-head
Kit reference: WB12-BRASS-KIT-023+
Extended tap length: 8cm, as specified by supplier
What is included
1 × brass water-butt connector with ¾″ BSP male mounting thread, ½″ BSP female outlet, back nut and sealing washers
1 × roll of PTFE thread-seal tape
1 × extended cross-head tap with ½″ BSP male inlet and ½″ hose barb
Check compatibility
Check tank-wall thickness and mounting clearance against the actual connector before making an opening. The nominal BSP designation is not a drilling-hole diameter. Use matching hose and suitable fastening at the barb. Check all joints before filling or opening the supply. Hose, hose clips and the tank/IBC are not included.
