1″ BSP Water Butt Kit – Inline Valve & 20mm Irrigation Barb

Add a controlled water outlet to a suitable tank with a brass reducing connector and the listed tap or valve. The kit includes PTFE tape and uses a 1″ BSP male tank connection.

Product details

• Tank mounting thread: 1″ BSP male
• Tank connector outlet: ¾″ BSP female
• Tank connector: brass, supplied back nut and washer
• Valve: black/orange plastic inline valve, ¾″ BSP male/male
• Finished outlet: 20mm irrigation barb
• Reference: WB34-BRASS-KIT-013+

What is included

• 1 × brass reducing tank connector, 1″ BSP male to ¾″ BSP female, with back nut and washer
• 1 × roll of PTFE tape
• 1 × black/orange manual inline valve, ¾″ BSP male/male
• 1 × straight irrigation director, ¾″ BSP female to 20mm barb

Fitting your product

Check the tank fitting or wall before installation. The mounting thread is 1″ BSP male; ¾″ BSP refers to the connector outlet. For an unthreaded tank wall, measure the actual connector and follow its installation instructions before drilling. Assemble the supplied fittings, seal the joints appropriately and check for leaks before filling. Tank, hose, separate hose clips and extra fittings are supplied separately. Match the irrigation hose bore and use suitable fastening.