Add a controlled water outlet to a suitable tank with a brass reducing connector and the listed tap or valve. The kit includes PTFE tape and uses a 1″ BSP male tank connection.
Product details
Tank mounting thread: 1″ BSP male
Tank connector outlet: ¾″ BSP female
Tank connector: brass, supplied back nut and washer
Valve inlet: ¾″ BSP male
Finished outlet: 13mm irrigation barb
Valve: Antelco 46705, manual on/off, purple back
Reference: WB34-BRASS-KIT-020+
What is included
1 × brass reducing tank connector, 1″ BSP male to ¾″ BSP female, with back nut and washer
1 × roll of PTFE tape
1 × Antelco 46705 irrigation valve, ¾″ BSP male to 13mm barb
Fitting your product
Check the tank fitting or wall before installation. The mounting thread is 1″ BSP male; ¾″ BSP refers to the connector outlet. For an unthreaded tank wall, measure the actual connector and follow its installation instructions before drilling. Assemble the supplied fittings, seal the joints appropriately and check for leaks before filling. Tank, hose, separate hose clips and extra fittings are supplied separately. Match the irrigation hose bore and secure it appropriately. The purple-backed valve is designated for recycled-water irrigation by the supplier.
